Sudhan Enterprises - Why High Price

The basic reasons for cost differences between our NOVA-PRO™ Inverters & other competing Inverters is due to following reasons:

*. We are using imported pure CRGO lamination, which is costly by 

     at least 40% than the normal or CRNO lamination used in the 

     other Transformers.

*. We use purely electrolytic type of copper with the wire gauge 

     designed to take at least 25% extra load.

*. Almost every component is checked and tested before 

    assembly, any component,which is found to be below 

     performance, is rejected

*. The tracks of the PCB are of the bigger size which can take

     the current capacity double than the required. No jumpers

     are used to compensate instead a fresh PCB is taken

*. We use 20 gauge MS for the box and the box is powder 

     coated from both the sides.

*. We use heat sink of 14 gauge,which is properly anodized.

*. We use modified waveforms.

[Due to our policy of constant upgradation, the features given above are subject to change without prior notice.]

The Advantages and the Benefits you get due to above Features

*. Due to the CRGO laminationgood magnetic flux is maintained which means higher efficiency and 

    minimum power loss thereby saving in electricity & obtaining more backup time for the System.

*. Due to the electrolytic copper  with higher gauge efficiency is increased and  transformeris never 

    overloaded,which means extended life of the Transformer is achieved by you.

*. As the components are tested before assembly there are less chances of field failure. 

     Less PCB related problems, less field failures.

*. Due to 20 gauge MS used the durability of box  is enhanced and dueto the powder  coating it 

    looks good and becomes rust proofwhich ensures that you can use it for extended period 

    without loosing the lust of the box.

*. The heat sink of proper thickness with  anodizing helps in proper

    distribution and let-out of heat which is generated during Inverter operation.

*. The use of modified wave form instead of pure square-wave  improves the performance of 

    the electrical gadgets used over it.

*. The last, but not the least we  do believe to give the Service after Guarantee and maintaining 

    the permanent relations with the customers.